loading Loading please wait....

Workshop

In association with In association with
HOW TO INVESTIGATE TDV6 TURBOCHARGER NOISE

HOW TO INVESTIGATE TDV6 TURBOCHARGER NOISE

{DISCOVERY 3 AND RANGE ROVER SPORT TDV6}A whistling turbo might be sorted by a simple cure  says Alisdair Cusickin an ideal world, the Discovery 3 should be the most popular vehicle with enthusiast...

HOW TO REPLACE A FREELANDER'S DIESEL FUEL INJECTOR

HOW TO REPLACE A FREELANDER'S DIESEL FUEL INJECTOR

When a Td4 injector fails, it seems logical to replace the set but, given the cost, replacing only the defective injector is the popular option. Dave Barker reports The owner of this regularly-serv...

HOW TO BUILD ROLL CAGES AND SPACE FRAMES

HOW TO BUILD ROLL CAGES AND SPACE FRAMES

Roll cages and space frames can be made to personal specifications for your Land Rover.Anything from a full roll cage to a relatively simple hoop will add significant safety to any Land Rover in th...

HOW TO REPLACE VCU SUPPORT BEARINGS ON A FREELANDER 1

HOW TO REPLACE VCU SUPPORT BEARINGS ON A FREELA...

Replacing Freelander 1’s rear drive shaft components is a realistic DIY prospect. Ed Evans explainsFreelander 1’s four wheel drive system comprises a split rear propshaft with the viscous coupling ...

HOW TO FIT CRUISE CONTROL TO YOUR DEFENDER

HOW TO FIT CRUISE CONTROL TO YOUR DEFENDER

Defender TDCi is a practical motorway cruiser, so an aftermarket cruise control kit is a logical upgrade. Ed Evans reports.With so many TDCi Defenders comfortably plugging long distances on main ro...

COOLANT SYSTEM CHECK ON A RANGE ROVER CLASSIC

COOLANT SYSTEM CHECK ON A RANGE ROVER CLASSIC

A cooling system check gives reliability and peace of mind. Alisdair Cusick and Ed Evans explain how and why.In the process of burning fuel, the internal combustion engine develops heat as a by-pro...

HOW TO REPLACE THE CRANKSHAFT POSITION SENSOR

HOW TO REPLACE THE CRANKSHAFT POSITION SENSOR

Td4 diesel performance problems may be down to a faulty engine sensor. Dave Barker explains how to diagnose and replace itThis is a tale of two Freelanders. The problem with Freelander A, a 2013 ma...

HOW TO FIT HEATED SCREENS

HOW TO FIT HEATED SCREENS

Get ready for winter and avoid misted and frozen screens by fitting a heated windscreen kit. Gary Stretton shows howSeries Land Rovers and Defenders suffer from marginal windscreen demisting capabi...

HOW TO DISMANTLE A ROLLING CHASSIS

HOW TO DISMANTLE A ROLLING CHASSIS

A complete strip down is the ultimate way to sort rust, and it’s not difficult. Trevor Cuthbert reportsA Land Rover chassis has many components attached to it, even after the main body shell has be...

HOW TO FIT POLYBUSHES

HOW TO FIT POLYBUSHES

(DISCO 1 & 2, DEFENDER. RR CLASSIC & P38A)There are good reasons for fitting polyurethane suspension bushes. Ed Evans explains how the job is doneThe original suspension bushes on a beam axle Land ...

Premium Listings

Featured Content